f Do one of the following:

„If you want to use a document as the watermark, press Scan.

Place the document that you want to use for the watermark on the scanner glass and press Black Start or Color Start.

The scanned data will be displayed on the LCD.

If you want to adjust the degree of Transparency for your scanned data, press Transparency.

Press d or c to adjust the degree, and then press OK.

Press OK again. Go to step g.

„If you want to use data from a media card or USB Flash memory drive as the watermark, insert the media card or USB flash memory drive.

After Photo Capture stops blinking, press Media.

The image will be shown on the LCD.

Press the image you want to use for the watermark.

You can adjust the Position, Size, Angle and Transparency of the watermark. Press OK.

Go to step g.

IMPORTANT

DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid damaging the card, USB Flash memory drive or the data stored on them.

g Press OK to confirm to use watermark. Load the document you want to copy.

h Enter the number of copies you want.

Making copies

i If you do not want to change additional settings, press Black Start or

Color Start.

Setting your favorites

You can store the copy settings that you use most often by setting them as a favorite. You can set up to three favorites.

a Press (Copy).

b Choose the copy option and settings you want to store.

c Press d or c to display

Favorite Settings.

d Press Favorite Settings.

e Press Store.

Note

Set Watermark Copy to Off or

Template when storing

Favorite Settings.

f Press the location where you want to store your settings for Favorite:1, Favorite:2 or Favorite:3.

g Do one of the following:

„ If you want to rename your setting,

12

press

to delete characters. Then

enter the new name (up to 12 characters).

Press OK. (See Entering Text on page 195.)

„If you do not want to rename your setting, press OK.

101