d Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum seal, then remove the cap (1).

1

Troubleshooting and Routine Maintenance

g The machine will automatically reset the ink dot counter.

Note

• If you replaced an ink cartridge, the LCD

B

may ask you to verify that it was a brand

new one (for example, Did You Change

 

Black). For each new cartridge you installed, press Yes to automatically reset the ink dot counter for that color. If the ink cartridge you installed is not a brand new one, be sure to press No.

If the LCD shows No Cartridge or Cannot Detect after you install the ink cartridges, check that the ink cartridges are installed properly.

e Each color has its own correct position. Insert the ink cartridge in the direction of the arrow on the label.

f Gently push in the ink cartridge until it clicks, and then close the ink cartridge cover.

CAUTION

If ink gets in your eyes, wash them out with water at once and call a doctor if you are concerned.

163