a Pull the paper tray (1) completely out of the machine.

1

b Wipe the outside of the machine with a dry lint-free soft cloth to remove dust.

c Lift the output paper tray cover and remove anything that is stuck inside the paper tray.

d Wipe the paper tray with a dry lint-free soft cloth to remove dust.

e Close the output paper tray cover and put the paper tray firmly back in the machine.

Troubleshooting and Routine Maintenance

Cleaning the scanner

a Lift the document cover (1). Clean the scanner glass (2) and the white

plastic (3) with a soft lint-free cloth B moistened with a non-flammable glass cleaner.

1

3

2

b In the ADF unit, clean the white bar (1) and the glass strip (2) with a lint-free cloth moistened with a non-flammable glass cleaner.

1

2

Note

In addition to cleaning the scanner glass and glass strip with a non-flammable glass cleaner, run your finger tip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning attempt.

165