Press MENU.
Press a or b to display Fax. Press Fax.
Press Memory Receive. Press Paging.

Chapter 6

g h

i Enter your cell phone or pager phone number. For pager numbers enter ## after the number. (You can enter up to

20digits including the ##.) Press OK.

Do not include the area code if it is the same as that of your machine.

For example, press:

1 8 0 0 5 5 5 1 2 3 4 # #.

j Do one of the following:

„If you are programming your cell phone number and do not need to enter a PIN, press OK.

„If your pager needs a PIN, enter the PIN, press #, press Pause, and then enter your fax number followed by

# # using the buttons on the LCD.

Press OK.

For example, press:

1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7 8 9 # #

„If you do not need a PIN, press Pause, and then enter your fax number followed by # # using the buttons on the LCD.

Press OK.

For example, press:

Pause 1 8 0 0 5 5 5 6 7 8 9 # #

k Press Stop/Exit.

50

Note

•You cannot change a paging number or PIN remotely.

•Paging does not work when you receive a color fax.

•If you want to be paged for voice messages, make sure you pressed the Message Center button on the control panel to turn the Message Center on.

Fax Storage

If you choose Fax Storage, your machine stores the received fax in the memory. You will be able to retrieve fax messages from another location using the remote retrieval commands.

If you have set Fax Storage, a backup copy will automatically be printed at the machine.

a b c

d Press a or b to display Setup Receive.

e Press Setup Receive.

f Press a or b to display Memory Receive.

g Press Memory Receive.

h Press Fax Storage.

i Press Stop/Exit.

Note

Color faxes cannot be stored in the memory. When you receive a color fax your machine prints the color fax at your machine.