Chapter 13
f Press the effect you wish to add. Press OK.
Go to step h.
Note
•You have 7 ways to add effects to your photo.
Auto Correct
The machine decides the appropriate effect for your photo.
Enhance Skin
Best used for adjusting portrait photographs. It adjusts human skin color. Press d or c to adjust the level of contrast.
Remove
The machine will attempt to remove
Enhance Scenery
Best used for adjusting landscape photographs. It highlights green and blue areas in your photo. Press d or c to adjust the level of contrast.
Monochrome
You can convert the color of your photo to monochrome.
Sepia
Adds a sepia tone (shades of brown) effect to your photo.
Auto Correct &
Remove
The machine decides the suitable effects for your photo. Also, it will attempt to remove
•There are some cases when
•When the face is too small in the image.
•When the face is turning too far up, down, left or right.
110
•After adding each effect, you can enlarge
the view of the image by pressing 
. To
go back to the original size, press 
.
•While the image is enlarged, you can
move around the image with up (
), down (
), left (
) and right (
).
•Press Cancel to return to the list of effects.
g Adjust the red frame around your photo. The part inside of the red frame will be printed.
Press + or - to enlarge or reduce the frame size.
Press a, b, d or c to move the position of the frame.
Press 
to rotate the frame.
Press OK when you have finished adjusting the frame setting. Press OK to confirm.
Note
If your photo is very small or has irregular proportions you may not be able to trim the photo. The LCD will display Image Too Small. or
Image Too Long.
h Enter the number of copies you want either by pressing the number box directly and enter the number you want or pressing + or
Press OK.
i Do one of the following:
Press Print Setting and change the print settings. (See page 112.)
If you do not want to change any settings, press Color Start to print.