
Chapter 5
g Do one of the following:
To cancel, press Yes.
If you want to cancel another job go to step f.
To exit without canceling, press No.
h When you have finished, press Stop/Exit.
Setting your changes as the new default
You can save the fax settings for Fax Resolution, Contrast,
Real Time TX, Glass ScanSize and Preview you use most often by setting them as default. These settings will stay until you change them again.
a Press (Fax).
b Press d or c to choose the setting you want to change, and then press the new option.
Repeat this step for each setting you want to change.
c After changing the last setting, press d or c to display Set New Default.
d Press Set New Default.
e Press Yes.
f Press Stop/Exit.
42
You can restore all the fax settings you have changed to the factory settings. These settings will stay until you change them again.
a Press (Fax).
b Press d or c to display Factory Reset.
c Press Factory Reset.
d Press Yes.
e Press Stop/Exit.
Sending a fax manuallyManual transmission lets you hear the dialing, ringing and
Note
If you are sending a multiple page fax, use the ADF.
a Press (Fax). b Load your document.
c To listen for a dial tone, press Speaker Phone on the machine or pick up the handset.
d Dial the fax number using the dial pad. You can also enter the fax number on the LCD by pressing Speed Dial and Send a fax. (For details, see How to Dial on page 73.)
e When you hear the fax tone, press Black Start or Color Start.
If you are sending from the scanner glass, press Send on the LCD to send the fax.
f If you pick up the handset, replace it.