
Chapter 13
Setting your changes as the new default
You can save the print settings you use most often by setting them as the default settings. These settings will stay until you change them again.
a Choose the print settings and options you want to store.
b After changing the last setting, press
aor b to choose Set New Default.
c Press Set New Default. d Press Yes to confirm. e Press Stop/Exit.
Restoring all settings to the factory settingsYou can restore all the settings you have changed to the factory settings. These settings will stay until you change them again.
a Press Print Setting.
b Press a or b to display Factory Reset.
c Press Factory Reset. d Press Yes to confirm. e Press Stop/Exit.
116
Scan to a memory card or USB Flash memory drive
Entering Scan modeWhen you want to scan to a memory card or
USB Flash memory drive, press (Scan). The LCD shows:
SCAN |
|
|
|
S c a n t o | S c a n | t o | S c a n t o |
E - m a i l | I m a g e | O C R | |
S c a n t o | S c a n | t o |
|
F i l e | M e d i a |
|
Press Scan to Media.
If you are not connected to your computer only the Scan to Media selection is available on the LCD.
(See Using the Scan key for Windows® or Macintosh in the Software User’s Guide on the