
Call History
(Call ID history and Outgoing Call history)
3All Settings
You can reset all the machine settings back to the settings that were set at the factory.
Brother strongly recommends you use this operation when you dispose of the machine.
Note
Unplug the interface cable before you choose Network or All Settings.
How to reset the machinea b
c d e f g
h Press Yes for 2 seconds to confirm to reset.
Troubleshooting and Routine Maintenance
Packing and shipping the machine
When you transport the machine, use the | B |
packing materials that came with your | |
machine. If you do not pack the machine |
|
properly, you may void your warranty. |
|
IMPORTANT
It is important to allow the machine to ‘park’ the print head after a print job. Listen carefully to the machine before unplugging it to make sure that all mechanical noise has stopped. Not allowing the machine to finish this parking process may lead to print problems and possible damage to the print head.
a Open the ink cartridge cover.
b Press the ink release lever to release the ink cartridge and take out the ink cartridges. (See Replacing the ink cartridges on page 162.)
c Install the green protective part and then close the ink cartridge cover.
171