Note

Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems.

Always make sure that the paper is not curled or wrinkled.

d When you have finished printing photos return the photo bypass tray to the normal printing position.

Squeeze the blue photo bypass tray release button (1) using your right index finger and thumb and pull the photo bypass tray back until it clicks (2).

1

2

IMPORTANT

If you do not return the photo bypass tray to the normal position after printing photos, you will get a No Paper Fed error when you use cut sheet paper.

Photo Bypass Tray

Photo Bypass Tray

in the Normal

in the Photo

printing position

printing position

Loading paper and documents

Removing small printouts from the machine

When the machine ejects small paper onto

the output paper tray cover you may not be 2 able to reach it. Make sure printing has finished, and then pull the tray completely out

of the machine.

15