Faxing from the ADF
1 If it is not illuminated in
green, press
(Fax). Pull out the ADF Document Support Extension.
2 Unfold the ADF Document Output Support Flap.
ADF Document
Support Extension
ADF
Document
Output
Support
Flap
3 Fan the pages well and
stagger them at an angle. Make sure you put the originals face up, top edge first in the ADF until you feel them touch the feed roller.
4 Adjust the paper guides to fit the width of your originals.
The originals are Face Up
in the ADF
Document Support
5 Dial the fax number.
Press Start. The MFC starts scanning the first page.
6 - 2 SETUP SEND