19 Network Scanning (Windows® 98/98SE/Me/2000 Professional and XP only)

To use the MFC as a Network Scanner, the NC-9100h Network board should be installed into the MFC (MFC-8820DN standard) and configured with TCP/IP and mail server settings if you use Scan to E-mail (E-mail server). You can set or change NC-9100h settings from the control panel or with the BRAdmin Professional utility or Web Management. (Please see the NC-9100h User's Guide on the CD-ROM.)

Registering your PC with the MFC

If you need to change the MFC that was registered to your PC during the installation of MFL-Pro (see Quick Setup Guide on page 38), follow the steps below.

1 For Windows® 98/Me/2000

From the Start menu, select Control panel, Scanners and Cameras, and then right-click Scanner Device icon and select Properties to view the Network Scanner Properties dialog box.

For Windows® XP

From the Start menu, select Control panel, Printers and Other Hardware, Scanner and Cameras (or Control panel, Scanners and Cameras).

NETWORK SCANNING (WINDOWS® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 19 - 1