The MP tray (For MFC-8820D and MFC-8820DN)

The MFC automatically turns on the MP Tray mode when you put paper in the multi-purpose tray.

1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver.

Media Type: Plain Paper

Paper Source: MP Tray

2 Open the MP tray and lower it gently.

3 Pull out the MP tray support flap.

4 When loading paper in the MP tray, make sure it touches the back of the tray.

Paper-guide

Release Lever

Make sure that the paper is straight and in the proper position on the MP tray. If it is not, the paper may not be fed properly, resulting in a skewed printout or a paper jam.

5 While pressing the paper-guide release lever, slide the paper guide to fit the paper size.

When you put paper in the MP tray, please remember the following:

■The side to be printed on must be face up.

■During printing, the inside tray rises to feed paper into the MFC.

■Put the leading edge (top of the paper) in first and push it gently into the tray.

6 Send the print data to the MFC.

11 - 6 USING THE MFC AS A PRINTER