Entering text
When you are setting certain functions, such as the Station ID, you may need to type text into the MFC. Most number keys have three or four letters printed above them. The keys for 0, # and do not have printed letters because they are used for special characters.
By pressing the appropriate number key repeatedly, you can access the character you want.
Press Key | one time | two times | three times | four times |
2 | A | B | C | 2 |
3 | D | E | F | 3 |
4 | G | H | I | 4 |
5 | J | K | L | 5 |
6 | M | N | O | 6 |
7 | P | Q | R | S |
8 | T | U | V | 8 |
9 | W | X | Y | Z |
|
|
|
|
|
Inserting spaces
To enter a space, press once between numbers and twice between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press to move the cursor under the incorrect character. Then press Clear/Back. The letter above the cursor will be deleted.
Repeating letters
If you need to enter a character that is on the same key as the previous character, press to move the cursor to the right before you press the key again.
GETTING STARTED 4 - 3