General Setup
Setting the Mode Timer
The MFC has three temporary mode keys on the control panel: Fax, Copy and Scan. You can change the number of seconds or minutes the MFC takes after the last Copy or Scan operation before it returns to Fax mode. If you select Off, the MFC stays in the mode you used last.
1 | Press Menu, 1, 1. |
| 11.Mode Timer | ||||
2 | Press | or | to select | ▲ | 0 | Sec | |
| 0 | Sec, 30 | Secs, 1 Min, |
| 30 Secs | ||
| ▼ | 1 | Min | ||||
| 2 | Mins, 5 | Mins or Off. | ||||
3 | Select | ▲▼ & Set | |||||
Press Set. |
|
|
|
|
|
Setting the Paper Type
To get the best print quality, set the MFC for the type of paper you are using.
For
1 Press Menu, 1, 2.
If you have the optional paper tray, press Menu, 1, 2, 1 to set the paper type for Tray #1 or Menu, 1, 2, 2 to set the paper type for Tray #2.
12.Paper Type
▲Plain Thick
▼Thicker Select ▲▼ & Set
12.Paper Type
1.Tray #1 2.Tray #2
Select ▲▼ & Set
2 Press or to select Thin, Plain, Thick, Thicker or Transparency.
3 Press Set.
4 Press Stop/Exit.
GETTING STARTED 4 - 5