02.Date/Time
Year:20XX
Enter & Set Key

4 Getting started

Initial Setup

Setting the Date and Time

Your MFC displays the date and time and if you set up the Station ID it prints on every fax you send. If there is a power failure, you may have to reset the date and time. All other settings will not be affected.

1 Press Menu, 0, 2.

2 Enter the last two digits of the year. Press Set.

3 Enter two digits for the month. Press Set.

(For example, enter 09 for September, or 10 for October.)

4 Enter two digits for the day. Press Set.

(For example, enter 06 for 6th.)

5 Enter the time in 24-Hour format. Press Set.

(For example, enter 15:25 for 3:25 P.M.)

6 Press Stop/Exit. The LCD now shows the date and time whenever the MFC is in Standby mode.

GETTING STARTED 4 - 1