Manual Duplex Printing

The MFC prints all the even-numbered pages on one side of the paper first.

Then, the Windows® driver instructs you (with a pop-up message) to reinsert the paper. Before reinserting the paper, straighten it well, or you may get a paper jam. Very thin or very thick paper is not recommended.

We recommend 75 to 90 g/m2 (20 to 24 lb) paper.

Face-down output tray

The MFC ejects paper with printed surfaces face down into the output tray in the front of the MFC. Unfold the support flap to support the printed pages.

When printing transparencies, remove each one from the support flap after it exits the MFC.

Support Flap with Extension

11 - 4 USING THE MFC AS A PRINTER