Setting the Tray Use for Fax mode
If your MFC doesn’t have the optional tray #2, you can skip this setting.
The default setting of Auto allows your MFC to choose the optional Tray #2 if Tray #1 is out of paper or if incoming faxes will fit best on the paper in Tray #2.
1 Press Menu, 1, 8.
2 Press or to select Tray#1
Only, Tray#2 Only, or Auto.
3 Press Set.
4 Press Stop/Exit.
18.Tray Use: Fax
▲Tray#1 Only Tray#2 Only
▼Auto Select ▲▼ & Set
If Auto Reduction is turned on, incoming faxes will be printed from the tray that is set for Auto Reduction. (See Printing a reduced incoming fax (Auto Reduction) on page
Setting the LCD Contrast
You can change the contrast to help the LCD look lighter or darker.
1 | 19.LCD Contrast | ||
Press Menu, 1, 7. | - |
| + |
| |||
| |||
| |||
|
|
| |
Press Menu, 1, 8. | Select | & Set | |
|
|
|
If you have the optional tray #2, press Menu, 1, 9.
2 Press to increase the contrast.
Press to decrease the contrast. Press Set.
3 Press Stop/Exit.
4 - 12 GETTING STARTED