Active LED is yellow:

The Active LED will blink if the print server is receiving or transmitting data.

If there is a valid connection to the network, the LED will blink orange or green.

TEST SWITCH

Short push: Prints the network configuration page.

Long push (more than 5 seconds): Reset the network configuration back to the factory default settings.

Test Switch

LED

Ethernet

RJ-45

LED

To set up the MFC on the Network, see the NC-9100h Network User’s Guide on the CD-ROM.

Paper Tray #2

You can purchase the Paper Tray #2 accessory (LT-5000) to use as a third paper source. Tray #2 holds up to 250 sheets of 20 lb (80 g/m2) paper.

Paper Tray #2

Holds approx. 250 sheets of 20 lb (80 g/m2)

Basis Weight

16 to 28 lb (60 to 105 g/m2)

Moisture Content

4% to 6% by weight

 

 

We Recommend:

Xerox 4200 DP 20 lb

Cut sheet:

Hammermill Laser Paper 24 lb

 

 

OPTIONAL ACCESSORIES 23 - 9