Printing on envelopes

To print on envelopes use manual feed tray or multi-purpose tray.

■The MFC automatically turns on the Manual Feed mode when you put paper in the manual feed tray.

■All sides should be properly folded without any wrinkles or creases.

1Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver.

Media Type: Envelope, Env.thin or Env.thick

For MFC-8420:

2 Open the back output tray.

3 Open the manual feed tray. Slide the paper guides to fit the envelope size.

If envelopes are creased after they have been printed:

At the back of the MFC, open the back output tray and push down the blue tabs at the left and right hand sides (as shown in the figure on the next page). When you have finished printing your envelopes, close the back output tray to reset the two blue tabs back to their original position.

USING THE MFC AS A PRINTER 11 - 11