23.Set Auto Dial 1.One-Touch Dial
One-Touch:
Select One-Touch
7 Auto Dial numbers and dialing options
Storing numbers for easy dialing
You can set up your MFC to do three types of easy dialing: One-Touch, Speed-Dial and Groups for Broadcasting faxes.
If you lose electrical power, the auto dial numbers that are in the memory will not be lost.
Storing One-Touch Dial numbers
Your MFC has 20 One-Touch keys where you can store 40 fax or phone numbers for automatic dialing. To access numbers 21 to 40, hold down Shift as you press the One-Touch key. When you press a One-Touch key the LCD
shows the name, if you stored it, or the number. (See One-Touch Dialing on page 7-5.)
One-Touch keys are the 20 keys (numbers 01–40) located on the left side of the control panel.
(For USA only) The Brother fax back system number has been preprogrammed on One-Touch key 1.
1 Press Menu, 2, 3, 1.
2 Press the One-Touch key where you want to store a number.
If you have not installed the optional LAN board (NC-9100h), go to Step 4.
—OR—
If you are using the MFC-8820DN or have installed the optional LAN board (NC-9100h), the MFC will ask you if the One-Touch key is for a fax/telephone number or an e-mail address. Go to Step 3.
3 Press 
or 
to select
Fax/Tel.
Press Set.
23.Set Auto Dial *007
▲Fax/Tel
▼ E-Address Select ▲▼ & Set
AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 1
