Setting up Sequential Polling Receive

Your MFC can ask for faxes from several fax units in a single operation (Sequential Polling Receive). Afterwards, a Sequential Polling Report will be printed.

1 If it is not illuminated in green, press 2 Press Menu, 2, 1, 7.

3 Press or to select On (or Off).

Press Set.

(Fax).

21.Setup Receive

7.Polling RX

▲On ▼ Off

Select ▲▼ & Set

4 Enter the fax machines you want

to poll using One-Touch, Speed-Dial, a Group or the dial pad. You must press Set between each fax number.

5 Press Start. Your MFC will poll each number or Group number in turn to receive a fax.

Setting Duplex printing for Fax mode (For MFC-8820D and MFC-8820DN)

If you set Duplex to On for fax receive, the MFC prints received faxes on both sides of the paper.

You can use three sizes of paper for this function - letter, legal and A4.

1 If it is not illuminated in green, press 2 Press Menu, 2, 1, 8.

3 Press or to select On (or Off).

Press Set.

(Fax).

21.Setup Receive 8.Duplex

▲On

▼ Off Select ▲▼ & Set

4 Press Stop/Exit.

While the Duplex printing for fax is working, auto reduction is also On temporarily.

5 - 10 SETUP RECEIVE