Real Time Transmission
When you are sending a fax, the MFC will scan the originals into the memory before sending. Then, as soon as the phone line is free, the MFC will start dialing and sending.
If the memory becomes full, the MFC will send the original in real time (even if Real Time TX is set to Off).
Sometimes, you may want to send an important original immediately, without waiting for memory transmission. You can set Real Time TX to On for all originals or for the next fax only.
If you want to fax multiple pages, use ADF.
1 If it is not illuminated in green, press (Fax). Place the original face up in the ADF, or face down on the scanner glass.
2 | Press Menu, 2, 2, 5. | 22.Setup Send |
| |||
3 | To change the default setting, | ▲ | 5.Real Time TX | |||
| press | or | to select On (or | Next Fax Only | ||
| ▼ | On |
| |||
| Off). |
|
| Select ▲▼ & Set | ||
| Press Set. |
|
|
|
|
|
| Go to Step 5. |
|
|
|
| |
|
|
|
|
|
| |
| For the next fax transmission only, press | or | to select | |||
| Next Fax Only. |
|
|
|
| |
4 | Press Set. |
|
|
|
|
|
Press | or | to select Next Fax:On (or Next |
|
Fax:Off).
Press Set.
5 Press 1 if you want to choose more settings and the LCD will return to the Setup Send menu.
Press 2 if you have finished choosing settings for this page, and then go to Step 6.
6 Enter the fax number.
7 Press Start to send the fax.
In Real Time Transmission using the scanner glass, the auto redial function doesn't work.
6 - 10 SETUP SEND