16 Using MFC Remote Setup

(For Windows®)

MFC Remote Setup

The MFC Remote Setup application lets you set up your MFC by using the ease and speed of programming on your PC. When you access this application, the settings on your MFC will be downloaded to your PC and displayed on your computer screen. If you change the settings, you can upload them directly to the MFC.

You can't use the MFC Remote Setup application if your MFC is only connected to a Network with the optional Network LAN board (NC-9100h). (See Web Based Management in the NC-9100h User's Guide.)

OK button

When you click OK, the process of uploading the data to the MFC begins. The MFC Remote Setup program is closed if an error message is displayed, enter the correct data again and then click OK.

Cancel button

The Cancel button clears your changes and exits the MFC Remote Setup application without uploading any data to the MFC.

Apply button

The Apply button uploads the data to the MFC, but stays in the Remote Setup application so you can make more changes.

USING MFC REMOTE SETUP 16 - 1