23.Set Auto Dial
2.Speed-Dial
Speed-Dial? #
Enter & Set Key

4 Enter a number (up to 20 digits). Press Set.

■If you want to enter a pause in the dialing sequence (for example, to access an outside line), press Redial/Pause as you are entering the digits. Each key press of Redial/Pause enters a 3.5 second pause when the number is dialed, and a dash appears on the screen.

5 Use the dial pad to enter the name (up to 15 characters). Press Set.

(You can use the chart on page 4-3 to help you enter letters.)

—OR—

Press Set to store the number without a name.

6 Go to Step 2 to store another One-Touch number

—OR—

Press Stop/Exit.

When you dial an auto dial number, the LCD shows the name and number you’ve stored, or, if you haven’t stored a name, only the number you’ve stored.

Storing Speed-Dial numbers

You can store Speed-Dial numbers, so that when you dial you will only have to press a few keys (Search/Speed Dial, #, the three-digit number, and Start). The MFC can store 300 Speed-Dial numbers.

1 Press Menu, 2, 3, 2.

2 Use the dial pad to enter a three-digit Speed-Dial number (001-300).

(For example, press 005.) Press Set.

If you have not installed the optional LAN board (NC-9100h), go to Step 4.

—OR—

If you are using the MFC-8820DN or have installed the optional LAN board (NC-9100h), the MFC will ask you if the Speed-Dial is for a fax/telephone number or an e-mail address. Go to Step 3.

3 Press or to select

Fax/Tel.

Press Set.

23.Set Auto Dial #100

▲Fax/Tel

▼ E-Address Select ▲▼ & Set

7 - 2 AUTO DIAL NUMBERS AND DIALING OPTIONS