Resetting the drum counter

When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps.

IMPORTANT

Do not reset the drum counter when you only replace the toner cartridge.

a Press to interrupt the error.

b Press .

c Press All Settings.

d Swipe up or down, or press a or b to display Machine Info..

e Press Machine Info.. f Press Parts Life.

g Touch the dial pad area to light up the LEDs.

h Press # until the Touchscreen message changes.

i Press the color of the drum unit you replaced.

j Press Yes.

k Press .

Routine maintenance

Replacing the belt unit

Order No. BU-220CL

A new belt unit can print approximately 50,000 Letter or A4 size single-sided pages.

Replace Belt

When the Replace Belt message appears on the Touchscreen, you must replace the belt unit.

After replacement, reset the belt unit by following the instructions included with the new belt unit (see Resetting the belt unit counter on page 94).

IMPORTANT

•DO NOT touch the surface of the belt unit. If you touch it, it could degrade print quality.

•Damage caused by incorrect handling of the belt unit may void your warranty.

a Make sure the machine is turned on.

b Open the top cover until it locks in the open position.

A

91