Network difficulties

Difficulties

Suggestions

 

Cannot print and scan over a

When the Cannot print to the networked printer. screen appears, follow the on-

network after completing the

screen instructions.

 

software installation.

If the problem is not solved, see Network User's Guide:Troubleshooting.

 

 

 

 

The network scanning feature

(Windows® and Macintosh)

 

does not work.

The network scanning feature may not work due to the firewall settings. Change

 

 

or disable the firewall settings. It is necessary to set the third-party

 

Security/Firewall Software to allow Network scanning. To add port 54925 for

 

Network scanning, enter the information below:

 

 

In Name: Enter any description, for example Brother NetScan.

 

In Port number: Enter 54925.

 

 

In Protocol: Make sure UDP is selected.

 

 

See the instruction manual that came with your third-party Security/Firewall

 

Software or call the software manufacturer.

 

 

For more information, you can read FAQs and troubleshooting suggestions at

 

http://solutions.brother.com/.

 

 

 

 

 

(Macintosh)

 

 

Re-select your machine in the Device Selector window from the Model pop-up

 

menu in the main screen of ControlCenter2.

 

The network PC-Fax Receive

(Windows® only)

 

feature does not work.

It is necessary to set the third-party Security/Firewall Software to allow PC-FAX

 

Rx. To add port 54926 for Network PC-FAX Rx, enter the information below:

 

In Name: Enter any description, for example Brother PC-FAX Rx.

 

In Port number: Enter 54926.

 

 

In Protocol: UDP is selected.

 

 

See the instruction manual that came with your third-party Security/Firewall

 

Software or call the software manufacturer.

 

 

For more information, read FAQs and troubleshooting suggestions at

 

http://solutions.brother.com/.

 

 

 

 

The Brother software cannot be

(Windows®)

 

installed.

If the Security Software warning appears on the computer screen during the

 

installation, change the Security Software settings to permit the Brother product

 

setup program or other program to run.

 

 

(Macintosh)

 

 

If you are using a firewall function of anti-spyware or antivirus security software,

 

temporarily disable it and then install the Brother software.

 

 

 

 

Cannot connect to the wireless

Investigate the problem using the WLAN Report. Press

, All Settings,

network.

 

Print Reports, WLAN Report and then press OK (see Quick Setup Guide).

 

 

 

130