Transferring your faxes or Fax Journal report

If the Touchscreen shows:

Print Unable XX

Scan Unable XX

We recommend transferring your faxes to another fax machine or to your computer (see Transferring faxes to another fax machine on page 110 or Transferring faxes to your computer on page 111).

You can also transfer the Fax Journal report to see if there are any faxes you must transfer (see Transferring the Fax Journal report to another fax machine on page 111).

NOTE

If there is an error message on the Touchscreen after the faxes have been transferred, disconnect the machine from the power source for several minutes, and then reconnect it.

110

Transferring faxes to another fax machine

If you have not set up your Station ID, you cannot enter fax transfer mode (see Quick Setup Guide: Set your Station ID).

a Press to interrupt the error temporarily.

b Press .

c Press All Settings.

d Swipe up or down, or press a or b to display Service.

e Press Service.

f Press Data Transfer.

g Press Fax Transfer. h Do one of the following:

If the Touchscreen shows No Data, there are no faxes left in the machine’s memory. Press Close.

Enter the fax number to which faxes will be forwarded.

iPress Fax Start.