3 Loading documents
How to load documents
You can send a fax, make copies, and scan from the ADF (Automatic Document Feeder) and the scanner glass.
Using the automatic document feeder (ADF)
The ADF can hold up to 35 pages and feeds each sheet individually. Use standard 20 lb
(80 g/m2) paper and always fan the pages before putting them in the ADF.
Document Sizes Supported
Length: | 5.8 to 14 in. (147.3 to 355.6 mm) |
Width: | 5.8 to 8.5 in. (147.3 to 215.9 mm) |
Weight: | 17 to 24 lb (64 to 90 g/m2) |
How to load documents
IMPORTANT
•DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
•DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper- clipped, pasted or taped.
•DO NOT use cardboard, newspaper or fabric.
•To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.
NOTE
• | To scan documents that are not |
|
| appropriate for the ADF, see Using the |
|
|
| |
• | It is easier to use the ADF if you are | 3 |
| loading a multiple page document. |
•Make sure documents with correction fluid or written with ink are completely dry.
a Unfold the ADF document support (1). Lift up and unfold the ADF document output support flap (2).
1
2
b Fan the pages well.
c Stagger the pages of your document face up top edge first, in the ADF until the Touchscreen shows ADF Ready and you feel the top page touch the feed rollers.
33