e Use both hands to push one sheet of paper or one envelope firmly into the manual feed slot until the top edge of the paper presses against the paper feed rollers. Continue pressing the paper against the rollers for about two seconds, or until the machine grabs the paper and pulls it in further.

NOTE

•If the error message Jam Manual Feed appears on the Touchscreen, the machine cannot grasp and pull the paper or envelope. Reset the machine by removing the paper and then pressing Start on the Touchscreen. Reinsert the paper or envelope and be sure to press it firmly against the rollers.

•Put the paper or envelope into the manual feed slot with the side to be printed on face up.

Loading paper

•When Label is selected in the printer driver, the machine will feed the paper from the manual feed slot, even if Manual is not selected as the paper source.

•Make sure the paper or envelope is

straight and in the correct position in the

2

manual feed slot. If it is not, the paper or

 

envelope may not feed correctly, resulting

 

in a skewed printout or a paper jam.

 

•Pull the paper or envelope out completely when you retry putting the paper into the manual feed slot.

•Do not put more than one sheet of paper or one envelope in the manual feed slot at any one time, as it may cause a jam.

f Send the print data to the machine.

NOTE

Remove each printed page or envelope immediately to prevent a paper jam.

g After the Touchscreen shows Manual Feed, return to step e to load the next sheet of paper. Repeat for each page you want to print.

h (For printing envelopes)

When you have finished printing, return the two gray levers, that you pulled down at step b, back to their original positions.

i Close the back cover (face-up output tray) until it locks in the closed position.

25