Brother PE-DESIGN V7 instruction manual Click a design to select it

Arranging Embroidery Designs (Layout & Editing)

3.Click a design to select it.

b Memo:

•To see a more detailed design, select a design, and then click Preview. A Preview dialog box similar to the one shown below appears.

•To import the displayed design, click Import.

•To return to the Browse dialog box, click Cancel.

•To quit the operation, click Cancel.

4.Click Import, or double-click the design to import it.

b Memo:

When importing some designs, the Select Import size dialog box appears. If this happens, select the desired import size, and then click OK to import the design.

a Note:

Due to copyright issues, some embroidery cards cannot be used with this function.

Importing embroidery designs from Design Center

An embroidery design in Design Center can be imported directly into the Design Page.

Toolbar button:

1.Start up Design Center and open the file that you want to import into Layout & Editing.

2.Click , or click File, then Import, then from Design Center.

→The Import size dialog box appears.

3.In the Magnification box, type or select the magnification factor.

a Note:

•The embroidery design cannot be magnified to a size larger than the Design Page.

•The magnification factor cannot be set below 25%.

4.Under Orientation, select the desired orientation.

5.Click Import to import the embroidery design.

b Memo:

•To quit the operation and close the dialog box, click Cancel.

•If Design Center has not been started up, if a .pem file has not been opened or if Design Center is not in the Sew Setting Stage, one of the following messages appear.

Click OK, and then start up Design Center and open a .pem file.

c “Manually Creating Embroidery Patterns From Images (Design Center)” on page 193

98