Automatically Converting an Image to an Embroidery Pattern (Layout & Editing/Image to Stitch Wizard)

6.

7.

In the Photo Stitch 2 Parameters dialog box, click Update Preview.

The previewed image is updated.

Click Finish.

An embroidery pattern is created and displayed in the Design Page.

If Photo Stitch 2 (Mono) is selected

A Select Mask dialog box similar to the one shown below appears.

a Note:

If the width or height of the image exceeds 500 mm, the following message appears. When this happens, adjust the original image size.

1.From the list at the bottom of the dialog box, select the desired shape that the image will be trimmed to (mask).

b Memo:

With a single-colored background, click Auto Generate to automatically detect the outline of the image.

2.In the image preview box, move the handles of the mask until it surrounds the desired part of the image

c For details on the settings, refer to page 82.

b Memo:

To display the Image Tune dialog box, where you can adjust the image, click Image Tune. (For more details, refer to “Image Tune” on page 83.)

89

Page 95
Image 95
Brother PE-DESIGN V7 If Photo Stitch 2 Mono is selected, Photo Stitch 2 Parameters dialog box, click Update Preview