Brother PE-DESIGN V7 instruction manual Specifying sewing attributes, Beginner mode Expert mode

Arranging Embroidery Designs (Layout & Editing)

a Note:

You can set the sewing attributes for the selected line and region sew types in the Sewing Attribute Setting dialog box.

When you select Prog. Fill Stitch, Motif Stitch or Piping Stitch with the Use Motif check box selected, you also need to select their pattern in the Sewing Attribute Setting dialog box, as there is no default pattern setting.

c “Line sew” on page 148, “Region sew” on page 148 and “Specifying sewing attributes” below

Specifying sewing attributes

Various sewing attributes for lines and regions can be set in the Sewing Attribute Setting dialog box

Toolbar button:

1.Click one of the Tool Box buttons used to draw or select objects.

2.Click in the Toolbar

→The Sewing Attribute Setting dialog box appears.

Beginner mode:

Expert mode:

b Memo:

•An alternate method to start this dialog box is to select the menu command Sew – Setting Attribute.

•The sewing attributes displayed in the dialog box depend on the selected sew type.

3.To display only basic sewing attributes and simpler settings, click To Beginner mode. To display all of the sewing attributes and settings available for the selected sew type, click To Expert mode.

b Memo:

•Settings that cannot be selected in Beginner mode are retained from the previous setting in Expert mode.

•To hide the preview box, click Hide Hint. To display the preview box, click Show Hint. When the Hide Hint button is displayed, the preview box is displayed, allowing you to view a stitching sample when the pointer is moved over the setting. The preview box shows the setting changes that you make.

4.If necessary, change the sewing attributes displayed under Line Sew or Region Sew.

151