Brother PE-DESIGN V7 instruction manual Click in the Design Page to specify point 1 start point

Arranging Embroidery Designs (Layout & Editing)

Another possibility is to load a template image and redraw it using manual punching patterns. The advantage of this method is that you have a better control on the thread orientation.

1.Open a template or prepare an image that you will use as a guide. (For more details, refer to “Importing Image Data” on page 76.)

2.Click on the Tool Box.

→Five buttons appear:

!!btn59.bmp!!

is for creating straight block-type

punching patterns. (Shortcut key: Z )

is for creating curved block-type

punching patterns. (Shortcut key: X )

is for semi-automatically creating block-

type punching patterns. (Shortcut key: C )

is for creating running-type punching

patterns (the broken line is sewn). (Shortcut

key: V )

is for creating feed-type punching patterns (the broken line is not sewn).

(Shortcut key: B )

→The shape of the pointer changes to

, and the Sewing Attributes bar appears similar to the one shown below.

b Memo:

•You can change the color and sew type either before or after creating the pattern. For more details on changing these settings, refer to “Color” on page 149 and “Sew type” on page 150.

•You can also use the settings in the Sewing Attribute Setting dialog box to define other attributes of the pattern. (For more details, refer to “Specifying sewing attributes” on page 151.) If you do not change these settings at this time, the current settings will be applied, however you can modify them later.

4.Click in the Design Page to specify point 1 (start point).

5.Refer to the illustration below, and click in the Design Page to specify points 2 through 8.

89

7

11 10

6

5

1213

While creating a manual punching pattern, you can alternate between the various types. For example, you can start with a straight block-type pattern, then switch to a running-

3

4

type pattern (to draw an outline of the block- type pattern), then switch to the feed type to move to the beginning of the next block-type pattern. The whole pattern, consisting of different types of punching patterns, will be considered a single pattern (all parts will have the same sew type and color).

In this example, we start with a straight block- type pattern, use the feed-type pattern to move the pointer, and then create a running- type pattern.

3.Click to start creating a straight block- type pattern.

1 2

89

7

Run pitch

11 10

6

5

1213

4

3

12

126