Brother PE-DESIGN V7 instruction manual Row Programmable Offset, Column Fill

Manually Creating Embroidery Patterns From Images (Design Center)

Select a pattern for programmable fill stitch.

Click , and then, in the Browse dialog box that appeared, select the folder containing the .pas file that you want to use. Double-click the desired pattern, or select it, and then click OK.

	Sets the programmable fill pattern width.
Width (horizontal length)	Range: 5.0 – 10.0 mm (0.20 – 0.39 inch)
	Default: 7.5 mm (0.30 inch)
	Sets the programmable fill pattern height.
Height (vertical length)	Range: 5.0 – 10.0 mm (0.20 – 0.39 inch)
	Default: 7.5 mm (0.30 inch)

	Allows you to rotate the angle of the programmable	135° 90°	45°
	fill patterns.	180°	0°
Direction	Range: 0–359 degrees
	Default: 0 degrees	225°	315°
		270°
	Sets the direction of the offset as row/column.	row

Programmable Offset		Direction			column
fill			When the pattern’s arrangement is offset, sets the amount of offset.
		Value	Range: 0–99%
			Default: 0%
			Specifies the shape of stitching on the edges.
			Available only when the Base Sewing check box is
		Stitch	selected.
		Type	Available settings:	,
	Base		Default:
	Sewing
	Specifies		Sets the pitch of the stitching for the base of a programmable fill stitch.
	the base		Available only when the Base Sewing check box is		Step pitch:
	stitching.	Step Pitch	selected.
	(For details,		Range: 1.0 – 10.0 mm (0.04 – 0.39 inch)
	refer to the		Default: 4.0 mm (0.16 inch)
	illustration
			Sets the spacial frequency steps of the stitching for the base of a programmable
	below.)
			fill stitch.
		Frequency	Available only when the Base Sewing check box is		30%	0%
			selected.
			Range: 0 – 99%
			Default: 30%

Pattern

The stitching for the base (area other than the pattern indicated by the diagonal lines) of the programmable fill stitch can be set.

The pattern is sewn with the specified stitching.

222