Brother PE-DESIGN V7 Creating a gradation, → The Gradation Pattern Setting dialog box appears

Manually Creating Embroidery Patterns From Images (Design Center)

Notes on programmable fill stitches

When setting the sew type and pattern directions of a programmable fill stitch, lines will not be sewn if the sew type and pattern direction settings cause a stitch to be sewn in the same direction as a line in the stitch pattern.

Use the Preview function to view exactly how the stitch pattern will be sewn, and then set the stitch direction and pattern direction according to the selected sew type or to the effect that you want to produce. To get an even better view, make test samples of different settings.

Examples of programmable fill stitching:

Example 1

Stitch direction: 45° (default)

Example 2

Stitch direction: 90°

Example 3

Stitch direction: 0°

c “Displaying a preview of the embroidery” on page 231 and “Creating Custom Stitch Patterns (Programmable Stitch Creator)” on page 256

■Creating a gradation

With a satin stitch, fill stitch or programmable fill stitch, the density of the color can be adjusted at various locations to create a custom gradation pattern.

1.In Expert mode of the Sewing Attribute Setting dialog box, select the Gradation check box.

2.Click Pattern.

→The Gradation Pattern Setting dialog box appears.

3.To select a preset gradation pattern, click the desired pattern under Select pattern.

4.Move the sliders to adjust the density of the gradation pattern.

b Memo:

The preview area shows the setting changes that you make.

5.Click OK.

b Memo:

To close the dialog box without applying the changes to the gradation pattern, click Cancel.

225