Tutorial (Advanced)

Repeat the previous operations to add another wave between the first and second waves on the right side.

Step 2 [Case 2] Creating patterns (embossing/ engraving) for region sewing (Fill/Stamp mode)

A stamp can be made by sewing regions of a fill stitch pattern with the fill stitch, satin stitch or the base stitch set for the embroidery pattern in order to create embossing and engraving effects.

In order to do this, the lines of the stitch pattern must form closed regions. In our example, the lines do not form closed regions, so we will need to add enclosing lines.

1Draw a line around the work area.

Click .

Click the upper-left corner of the work area.

Move the pointer along the top edge of the work area, and then double-click the upper- right corner to draw a line along the top edge.

Click the lower-left corner of the work area.

309

Page 315
Image 315
Brother PE-DESIGN V7 instruction manual Draw a line around the work area