Brother PE-DESIGN V7 instruction manual Changing Software Settings, Changing the grid settings

Manually Creating Embroidery Patterns From Images (Design Center)

Changing Software

Settings

■Changing the grid settings

A grid of dotted lines or solid lines can be displayed or hidden, and the spacing for the grid can be adjusted. (This function is available only in the Figure Handle Stage.)

1.Click Display, then Grid Setup.

→The Grid Setting dialog box appears.

2.

3.

To display the grid, select the Show Grid check box.

To hide the grid, clear the Show Grid check box.

To set the grid spacing, type or select a value in the Grid interval box. (The setting range is 1.0 to 25.4 mm (0.04 to 1.0 inch).)

4.To display the grid as solid lines, select the with Axes check box.

To display the grid as dotted lines, clear the with Axes check box.

a Note:

When the Show Grid check box is selected and the with Axes check box is cleared, only the intersecting points of the grid will be displayed.

5.Click OK to apply the changes and to close the dialog box.

b Memo:

To close the dialog box without applying the changes to the grid, click Cancel.

■Changing the measurement units

The measurements for values displayed in the application can be in either millimeters or inches.

1.Click Option, then Select System Unit, and then select the desired measurement units (mm or inch).

236