Brother PE-DESIGN V7 Line sewing, Applying sewing attributes to the entire outline

Manually Creating Embroidery Patterns From Images (Design Center)

■Line sewing

Applying sewing attributes to the entire outline

1.Click on the Tool Box.

→The shape of the pointer changes to

, and the Sewing Attributes bar appears similar to the one shown below.

2.If necessary, change the color and sew type.

b Memo:

•You can change the color and sew type either before or after applying sewing attributes to the outline. For more details on changing these settings, refer to “Color” on page 215 and “Sew type” on page 215.

•You can also use the settings in the Sewing Attribute Setting dialog box to define other attributes of the sew type. (For more details, refer to “Specifying sewing attributes” on page 216.) If you do not change these settings at this time, the current settings will be applied, however you can modify them later.

3.Click the outline where you want to apply the sewing attributes.

→“Marching lines” appear along the selected outline, and the color and sew type selected on the Sewing Attributes bar are applied to the outline.

Applying sewing attributes to a portion of the outline

1.Click on the Tool Box.

→The shape of the pointer changes to

, and the Sewing Attributes bar appears similar to the one shown below.

2.If necessary, change the color and sew type.

211