Brother PE-DESIGN V7 instruction manual Fill stitch, Stitch Type

Arranging Embroidery Designs (Layout & Editing)

b Memo:

For details on manual punching, refer to “Manually Creating Professional-Level Embroidery Patterns (Manual Punching)” on page 125.

Fill stitch

	Sets under lay stitching on or off. Use under lay stitching in order to prevent shrinking during
	stitching.
	On: Under lay stitching will be sewn.
	Off: Under lay stitching will not be sewn.
	Default: Off
	[Type] Specifies the type of under lay stitching sewn.	Edge:	Zigzag:			All:
	With text and manual punching patterns
Under sewing
	Edge: The stitching sewn under the edge of the pattern.
	Zigzag: Zigzag stitching is sewn under the areas of the pattern.
	All: Stitching is sewn under the edge and areas of the pattern.
	With other patterns		Single:	Double:
	Single: Sews perpendicular to the specified sewing direction.
	Double: Sews a pattern with 45° and – 45° angle to the specified
	sewing direction.
	Sets the number of lines per millimeter.
Density	Range: 1.0–7.0 lines per mm (25–178 lines per inch)
	Default: 4.5 lines per mm (114 lines per inch)
	Sets the density gradation setting on or off. This setting can be specified for patterns other
	than manual punching patterns.
Gradation	Available when the type of sewing direction is set to Constant.
	Click Pattern to set the gradation pattern and its density.
	Default: Off
	For details on this attribute, refer to“Creating a gradation” on page 162.
	[Type] Specifies the type of sewing direction. This setting can be specified for patterns other
	than manual punching patterns.
	Constant: Sews at a fixed angle. The angle is specified by the angle setting.
Direction	Variable: Varies the sewing direction according to the object being sewn. 135°			90° 45°
	[Angle] Specifies the sewing angle.		180°			0°
	Available only when the sewing direction type is set to Constant.
	Range: 0–359 degrees		225°		315°
	Default: 45 degrees			270°

Specifies the shape of stitching on the edges.

Stitch Type	Available settings:		,
	Default:	(for all objects other than text)
		(for text)
	Sets half stitching on or off.
	Available for text, manual punching patterns, and for geo-			On:
	metric shapes when the type of sewing direction is set to
Half Stitch	Variable.			Off:
	If one side of the fill stitching is dense, a half stitch could be
	sewn automatically to provide a more even density.
	Default: Off
	Sets the running path of the stitching.			Inside of region:
	Available when the type of sewing direction is set to Constant.
	Available settings:
Running Stitch Path	• Inside of region (shortest route)			Along outline:
	• Along outline (along the inner side)
	• Onto outline (on the outline)
	The inside of region setting is available only when the Gradation			Onto outline:
	check box is cleared.
	Default: Inside of region

156