Brother PE-DESIGN V7 Entering Monograms Layout & Editing, Creating monograms, Enter the letters

Tutorial

Entering Monograms (Layout & Editing)

Using the monogram function, ornamented characters arranged in a decorative pattern can be created. This procedure will go through each step of the basic operation.

Step 1	Creating monograms
Step 2	Changing the font and character size
Step 3	Changing the thread color and sew type
Step 4	Adjusting the size and position of the decorative pattern
Step 5	Saving the embroidery design
Step 6	Transferring the design to an original card

Step 1 Creating monograms

As an example, we will create a monogram with a decorative pattern added to the letters “ABC”.

1Start up Layout & Editing.

Click , then select All Programs,

then PE-DESIGN Ver7, then Layout & Editing.

2Select the monogram tool.

Click , then .

Diamond and script fonts are exclusively used for monograms. But you can use other built-in fonts and True Type Fonts.

The illustration above allows you to change the font, size and sew type.

3Enter the letters.

Click in the Design Page where you want the monogram to appear.

Type “ABC” using the computer key board.

a Note:

•You can also enter a character by selecting it in the character table, then clicking Insert, or simply by double- clicking it.

•You cannot insert line feeds. If you press the Enter key, the dialog closes and the monogram pattern is displayed in the Design Page.

66