Adding comments to saved .pes files

Arranging Embroidery Designs (Layout & Editing)

b Memo:

Designs created on a custom-sized Design Page are written to cards split into their various sections.

If the total size of the design exceeds the capacity of the original card or if your Design Page is set to a custom size of 90 ⋅ 90 cm (3.54” ⋅ 3.54”), and is split into over 80 sections, you will need to split the design into sections and write them onto several original cards.

In this case, the Select Hoop Sections dialog box appears to let you select the sections that can be written in the available space on the card.

The progress bar at the top of the dialog box shows the available space on the card as you select design sections to be written to the card. The space used by the selected design sections appears in blue. If you select several pattern sections which exceed the size limit, the space used appears in red.

Click each design section to select it, and then click Write to write the selected design sections to the card. To deselect a design section, simply click it again. (The Write button is available only when a section is selected and the space on the card is sufficient to receive the selected design.)

3.Click OK.

→The message “Now transmitting” appears while the current embroidery design is transferred to the original card, and then the following message appears.

b Memo:

To quit the operation, click Cancel.

4.Click OK to close the message.

b Memo:

“Overwriting” on page 177 and “Saving with a new name” on page 177