Brother PE-DESIGN V7 instruction manual Saving the design, Writing the design to an original card

Arranging Embroidery Designs (Layout & Editing)

■Saving the design

1.Click File, then Save or Save As, and then save the design.

→The entire design is saved as a single file (.pes).

b Memo:

If the file size or the number of color changes is larger than the specified number, or if one of the patterns does not completely fit within an embroidery area, the message “Please change the object size or position. Do you want to save the data anyway?” appears.

■Writing the design to an original card

1.If your design is displayed in the Design Page,

click File, then Write to Card, or click on the Toolbar, and then write the design to an original card.

A design for a multi-position hoop is created by considering the pattern in each hoop installation position as one pattern, then combining them.

Therefore, when this type of design is written to an original card, one multi-position hoop design is saved as a combination of multiple patterns.

If the design shown above is written to an original card and the written pattern is checked on the embroidery machine, it appears as shown below.

:This pattern is sewn when the hoop is installed at the top installation position (position a).

:This pattern is sewn when the hoop is installed at the middle installation position (position b).

:This pattern is sewn when the hoop is installed at the bottom installation position (position c).

Therefore, the frame installation position sewing order for the pattern shown above is b, a, then c.

187