Brother PE-DESIGN V7 If Photo Stitch 1 Mono is selected, To select several colors, hold the Shift

Automatically Converting an Image to an Embroidery Pattern (Layout & Editing/Image to Stitch Wizard)

b Memo:

•To move the color selected in the Color List to the Use Color List, click Add. If no color is selected, or if the Use Color List already contains 50 colors, this button cannot be clicked.

•To delete the color selected in the Use Color List, click Remove. If no color is selected in the Use Color List, this button cannot be clicked.

•The thread colors in the Color List and Use Color List are listed, in order, starting from the brightest. This order is the sewing order and cannot be changed.

•The maximum number of colors that can be added to the Use Color List is 50.

•Thread colors displayed in the Use Color List are not displayed in the Color List.

• To select several colors, hold the Shift

key (to select adjacent colors) or the Ctrl key (to select colors that are not adjacent), and then select the desired colors.

•To apply the changes to the list and close the dialog box, click OK. The selected colors are applied to the preview shown in the Photo Stitch 1 Parameters dialog box. This button cannot be clicked if the Use Color List is empty.

•To close the dialog box without applying the changes, click Cancel.

6.In the Photo Stitch 1 Parameters dialog box, click Update Preview.

→The previewed image is updated.

7.Click Finish.

→An embroidery pattern is created and displayed in the Design Page.

■If Photo Stitch 1 (Mono) is selected

→A Select Mask dialog box similar to the one shown below appears.

a Note:

If the width or height of the image exceeds 500 mm, the following message appears. When this happens, adjust the original image size.

1.From the list at the bottom of the dialog box, select the desired shape that the image will be trimmed to (mask).

b Memo:

With a single-colored background, click Auto Generate to automatically detect the outline of the image.

2.In the image preview box, move the handles of the mask until it surrounds the desired part of the image

c For details on the settings, refer to page 82.

b Memo:

To display the Image Tune dialog box, where you can adjust the image, click Image Tune. (For more details, refer to “Image Tune” on page 83.)

3.In the Select Mask dialog box, click Next.

85