Brother PE-DESIGN V7 Changing the size, Vertical text will be displayed vertically on the Design

Arranging Embroidery Designs (Layout & Editing)

		0 degree
Rotate	Rotates the characters.
	Range: 0 to 359 degrees
angle		20 degrees
	Default: 0
	Sets the spacing	0.0 mm
Character	between all characters.
	Range: -100 to 100 mm
Spacing
		2.0 mm
	(-3.94 to 3.94 inches)
	Default: 0
	Sets the spacing	100%
	between lines as a per-
Line	centage of the character
Spacing	height.	150%
	Range: 0–1000%
	Default: 100%
		Left
	Aligns several lines of text	Center
Alignment
	to the left, center or right.
		Right
		Horizontal
	Specifies whether
		Vertical
Direction	characters will be
	positioned horizontally
	or vertically.

b Memo:

•Vertical text will be displayed vertically on the Design Page.

•Both Kerning and Character Spacing set the spacing between characters. Character Spacing is always applied to the entire text pattern, while Kerning can be applied to individual characters. Applying Kerning to the entire text in the pattern is the same as specifying Character Spacing. Refer to “Selecting characters” on page 131 for more details about selecting individual characters in a text pattern.

c “Specifying text arrangement” below and “Transforming text” on page 137

Easy changes to the character size and attributes

You can easily use drag operations to change the size and text attributes (character spacing, vertical offset, rotation) for text, small text, and monogram characters.

1.Click → !btn29. .

b Memo:

For more details, refer to “Selecting characters” on page 131.

2.Click the point for the character that you want to select.

→The handles appear on the character to show that it is selected.

■Changing the size

1.Bring the pointer onto the handle.

→The shape of the pointer changes to .

2.Drag the handle.

→The size of the character outline displayed with dotted lines changes.

133