Brother PE-DESIGN V7 Creating Custom Stitch Patterns Programmable Stitch Creator

Tutorial (Advanced)

Creating Custom Stitch Patterns (Programmable Stitch Creator)

Programmable Stitch Creator allows you to create and edit programmable fill stitch and motif stitch patterns, which can be used in both Layout & Editing and Design Center. More decorative stitch patterns can be designed by using these patterns.

This procedure will go through each step of the basic operation.

Step 1	Opening a programmable stitch pattern
Step 2	[Case 1]	Drawing lines to edit the stitch pattern
	[Case 2]	Creating patterns (embossing/engraving) for region sewing (Fill/Stamp mode)
	[Case 3]	Reshaping a single line to create custom stitch patterns (Motif mode)
Step 3	Saving the edited stitch pattern

Step 1 Opening a programmable stitch pattern

First, we will open the fill stitch pattern to be edited. In this example, we will use stitch pattern wave1.pas.

1Start up Programmable Stitch Creator.

Click , then select All Programs,

then PE-DESIGN Ver7, then Programmable Stitch Creator.

2Open the programmable fill stitch pattern.

Select the stitch pattern file wave1.pas in the Pattern folder.

Click Open, or double-click the files icon.

Click File, then Open.

307