Brother PE-DESIGN V7 instruction manual Printing a Design Page for a multi- position hoop

Arranging Embroidery Designs (Layout & Editing)

Notes on embroidering using the multi- position hoop

•Before embroidering your design, sew a trial sample of the design on a scrap piece of fabric from your design, making sure to use the same needle and thread.

•Be sure to affix stabilizer material to the back of the fabric and tightly stretch the fabric within the hoop. When embroidering on thin or stretch fabrics, use two layers of stabilizer material. If no stabilizer material is used, the fabric may become over-stretched or wrinkled or the embroidery may not be sewn correctly.

•For more ways to stabilize large designs, refer to “Attaching stabilizer to the fabric” on page 189

•Use the zigzag stitch for sewing the outlines in order to prevent embroidering outside the outlines.

•For patterns that require the hoop to be installed at different installation positions, design the embroidery pattern so that the various parts of the pattern overlap in order to prevent misalignment while embroidering.

■Printing a Design Page for a multi- position hoop

If a Design Page for a multi-position hoop is selected, a complete image of the Design Page is printed on the first page, followed by an image of each design section and its sewing information (dimensions of the embroidery, the hoop position, the sewing color order and the stitch count), so the number of pages depends on your design.

•If a 130 ⋅ 300 mm Design Page is selected, the pattern is divided into sections of 130 ⋅ 180 mm with each section printed on a separate page.

•If a 100 ⋅ 172 mm Design Page is selected, the pattern is divided into sections of 100 ⋅ 100 mm with each section printed on a separate page.

The Design Page is printed as described below.

When Actual Size is selected:

On the first page, the entire Design Page is printed at actual size. (However, for a 130 ⋅ 300

mmDesign Page, a reduced image of the Design Page is printed.) Afterwards, the pattern in each section of the Design Page is printed, starting with that sewn with the first hoop installation position, and is followed by the sewing information for that pattern on separate pages.

When Reduced Size is selected:

On the first page, the entire Design Page is printed at actual size. (However, for a 130 ⋅ 300

mmDesign Page, a reduced image of the Design Page is printed.) Afterwards, the pattern in each section of the Design Page is printed, starting with that sewn with the first hoop installation position, on the same page as the sewing information for that pattern.

b Memo:

When the menu command File – Print Preview is selected, each section of the design is displayed as described above.

188