Brother PE-DESIGN V7 Thread Color Setting, → The Photo Stitch 2 Parameters dialog box appears

Automatically Converting an Image to an Embroidery Pattern (Layout & Editing/Image to Stitch Wizard)

3.In the Select Mask dialog box, click Next.

→The image is analyzed, and the Check Mask Shape dialog box appears.

b Memo:

Areas not set to be sewn are shown filled with a crosshatch pattern.

4.Click Next.

→The Photo Stitch 2 Parameters dialog box appears.

5.Specify the settings for creating the embroidery pattern.

b Memo:

•To return to the previous dialog box, click Previous.

•To quit the operation and close the dialog box, click Cancel.

Sewing Option

	Specifies the interval between parallel
	lines used to create the embroidery
	pattern.
Line interval	Range: 1.2 to 5.0 mm (0.05 to 0.2 inch)
	Default: 2.0 mm (0.08 inch)
		Line interval
	Specifies the maximum density for
	areas of the created embroidery pattern
	sewn with the zigzag stitch. The
Max. Density	embroidery pattern will be created with
	a density smaller than that set here.
	Range: 2.5 to 5.0 lines per mm (64 to
	127 lines per inch)
	Default: 3.0 lines per mm (76 lines per inch)

Thread Color Setting

	You can select the brand of thread you
	want to use with the Color Set function.
Thread Chart	The colors will be selected
	automatically correspond with the Color
	Set selection. A user thread chart can
	also be selected.
	If Auto Select is selected, the most
	appropriate four colors will automatically
	be selected. Selecting a different option
	specifies the four colors used when
	creating the embroidery pattern.
	The color choices are: cyan (C),
Color Set	magenta (M), yellow (Y), black (K), red
	(R), green (G) and blue (B). Select one
	of the following combinations that
	contains the colors most used in the
	image.
	Color combinations: CMYK, RGBK,
	CRYK, BMYK
Thread	Displays the four selected thread colors.
Colors Used
	In Thread Colors Used click on the color
	you want to change. Then click on
Change	Change Color to open the Thread Color
	dialog box. Select the new color and click
Color
	ok. You will see the color change within
	the photo in the preview box within the
	Photo Stitch 2 Parameters dialog.
	The top slider is used to adjust the
	brightness. Move the slider to the right
	to increase the brightness or to the left
Brightness /	to decrease the brightness. The bottom
	slider is used to adjust the contrast.
Contrast
	Move the slider to the right to increase
	the contrast or to the left to decrease
	the contrast. Click on Update Preview to
	see the changes made.
Update	Click this button to update the
	previewed image after settings have
Preview
	been changed.

88