Brother PE-DESIGN V7 Editing the outlines Line Image Stage, This draws more leaf veins

Tutorial

→The line image is displayed in the Design Page.

Step 3 Editing the outlines (Line Image Stage)

At this time, you might need to correct a few lines in the line image. You should make sure that regions are completely enclosed by either a single closed line or intersecting lines. Here, we will try to simply draw more leaf veins and to erase a number of leaves.

After editing the line image, we will continue to the Figure Handle Stage, where the line image is converted to a figure handle image.

1This draws more leaf veins.

Click .

→When the pointer is moved over the work area, the shape of the pointer changes to

.

Click the leaf for which you want to draw more veins.

b Memo:

•To further enlarge the line image, continue clicking the line image.

•To zoom in on a specific area, move the pointer near the desired area, and then drag the pointer diagonally over the desired area. A dotted box appears as you drag the pointer, and the selected area is enlarged when the mouse button is released.

•To zoom out from the line image, click , and then click the line image.

Click .

35