Brother PE-DESIGN V7 Creating Large-Size Embroidery Designs, Specify the Design Page size

Tutorial (Advanced)

Creating Large-Size Embroidery Designs

Large-size embroidery designs can be created in Layout & Editing.

This procedure will go through each step of the basic operation.

Step 1	Specifying the Design Page size in Layout & Editing
Step 2	Creating the embroidery design
Step 3	Checking the embroidering order
Step 4	Saving the design
Step 5	Transferring the design to an original card

Step 1 Specifying the Design Page size in Layout & Editing

First, we will specify the size of the Design Page to match the size of the embroidery design.

1Start up Layout & Editing.

Click , then select All Programs,

then PE-DESIGN Ver7, then Layout & Editing.

Select Custom Size, and then type or select the desired width and height for the Design Page.

The setting range for Width and Height is 100 mm to 1000 mm (3.9 inch to 39.4 inch). This setting is to specify the exact width and height of a design.

For this example, set width to 230 mm and height to 330 mm

2Specify the Design Page size.

Click Option, then Design Page Property.

Click in the Section Size (for Hoop Size) selector, and then select the size of the sections (your embroidery hoop). For this example, select 120 ⋅ 170 mm (130 ⋅ 180 mm).

313