Brother PE-DESIGN V7 instruction manual Sewing Option, Color Option

Automatically Converting an Image to an Embroidery Pattern (Layout & Editing/Image to Stitch Wizard)

Sewing Option

	Specifies how detailed the created
	embroidery pattern will be. Selecting a
Detail	setting closer to Fine creates more
	details in the pattern and increases the
	number of stitches. (The stitches will
	overlap)
	Sets the sewing pitch. The pattern is
	created with this setting value as the
	minimum length. When the value is
Run Pitch	lowered, the sewing pitch will be
	shortened, resulting in finer stitching.
	Range: 2.0 to 10.0 mm (0.08 to 0.39
	inch)
	Default: 3.0 mm (0.12 inch)
	If this check box is selected, the data for
	the parts of the pattern that are the
Sew Page	same color as the Design Page will be
	created. Clear the check box to keep
Color
	the fabric the same color as the Design
	Page.
	Default: Selected
	Select what parameter is given priority
	when converting to embroidery pattern.
	Stitch Quality: Creates a pattern while
	giving priority to the stitching quality.
Conversion	However, many jump stitches will result.
	Jump Stitch Reduction: Creates a
Priority
	pattern while giving priority to reducing
	the number of jump stitches in order to
	reduce complications during
	embroidering. However, the stitching
	quality will be slightly reduced.
	If Photo is selected, the thread colors
	will be mixed together, which will result
	in a more natural look.
	If Cartoon is selected, the thread colors
Image Type	will not be mixed together, which will
	result in a more simply colored look.
	Select Photo for image data from a
	photograph, etc. Select Cartoon for
	image data from an illustration, etc.

Color Option

	Select this check box to automatically
	select the thread colors.
Auto Select	As a default, this check box is selected.
	If this check box is cleared, select the
	thread colors manually.
	Appears when the Auto Select check
	box is cleared.
Manual	Click this button to open the Manual
	Select dialog box, which lets you
Select
	manually set the thread colors to be
	used when creating the pattern (see
	below).

	Selects the thread chart for selecting
	the thread color with the Auto Select
	function.
Thread Chart	The most appropriate thread colors
	from the selected thread chart are
	selected.
	A user thread chart can also be
	selected.
	Sets the number of colors selected by
Max. Number	the Auto Select function.
of Colors	Range: 1 to 50
	Default: 10
	The top slider is used to adjust the
	brightness. Move the slider to the right
	to increase the brightness or to the left
Brightness /	to decrease the brightness. The bottom
	slider is used to adjust the contrast.
Contrast
	Move the slider to the right to increase
	the contrast or to the left to decrease
	the contrast. Click on Update Preview to
	see changes made.
	Click this button to open the Select
	from Candidates dialog box. Variations
Select from	of the image with different degrees of
	brightness and contrast are displayed.
Candidates
	Click one of the variations, and then
	click OK to apply the settings and
	display a preview of the image.
Update	Click this button to update the
	previewed image after settings have
Preview
	been changed.

84